● Large area imaging, no edge image distortion
● The frame rate of 30 fps
● Sensitivity comparable to image intensifiers
● Better dynamic range and image signal-to-noise ratio than image intensifier
X-Panel 2121a FDI is a 20.4 x 20.4cm real-time, fixed amorphous silicon, digital X-ray flat panel detector. It features excellent sensitivity and high dynamic range modes. The X-Panel 2121a FDI structural design effectively reduces the bending radius of the detector outlet, shortening the wiring space for easy installation and integration of systems. Its embedded firmware image calibration minimizes the difficulty of software development and resource consumption for computer hardware configuration. Suitable for casting, pipe welding, pressure container applications.
|
Technology |
|
|
Sensor |
a-Si |
|
Scintillator |
CsI / GOS |
|
Active Area |
204 x 204 mm |
|
Pixel Matrix |
1024 x 1024 |
|
Pixel Pitch |
200 μm |
|
AD Conversion |
16 bits |
|
Interface |
|
|
Data Interface |
Gigabit Ethernet |
|
Exposure Control |
Pulse Sync In / Pulse Sync Out |
|
Frame Speed |
30 fps (1x1) |
|
Operating System |
Windows7 / Windows10 OS 32 bits or 64 bits |
|
Technical Performance |
|
|
Resolution |
2.5 lp/mm |
|
Energy Range |
40~160 KV / 350KV |
|
Lag |
0.8% @1st frame |
|
Dynamic Range |
≥86 dB |
|
Sensitivity |
1100 lsb/uGy |
|
SNR |
50 dB @ (20000lsb) |
|
MTF |
55% @(1 lp/mm) |
|
32% @(2 lp/mm) |
|
|
13% @(3 lp/mm) |
|
|
DQE |
73% @(0 lp/mm) |
|
48% @(1 lp/mm) |
|
|
28% @(2 lp/mm) |
|
|
Mechanical |
|
|
Dimension(H x W x D) |
241 x 241 x 45 mm |
|
Weight |
2.9 kg / 4.8 kg |
|
Sensor Protection Material |
Carbon Fiber |
|
Housing Material |
Aluminum Alloy |
|
Environmental |
|
|
Temperature Range |
10~35℃(operating);-10~50℃(storage) |
|
Humidity |
30~70% RH(non-condensing) |
|
Vibration |
IEC 60068-2-64 Operation: 1G,5-500Hz |
|
Shock |
IEC 60721-2-27 Operation: 2G, duration 11ms |
|
Dust and Water Resistant |
IPX0 |
|
Power |
|
|
Supply |
100~240 VAC |
|
Frequency |
50/60 Hz |
|
Consumption |
9.5W |
