Tlhahiso ea Whale4343PSV ke mofuta o nkehang habonolo le lerata le tlase la x-ray flat panel detector e thehiloeng ho theknoloji ea silicon ea amorphous.A-Si thekenoloji e thehiloeng ho theknoloji e na le melemo e mengata e sa fumaneheng ka theknoloji e 'ngoe, tlhahiso ea Whale4343PSV e nka boleng bo phahameng ba setšoantšo le mefuta e mengata e matla, hape Whale4343PSV e na le mekhahlelo e mengata ea phaello, ts'ebetso ena e etsa hore ho khonehe hore detector e ka ba tse loketseng. kutlo e phahameng le litlhoko tse kholo tsa mefuta e fapaneng.Ho ipapisitsoe le litšoaneleho tse kaholimo, mochini oa Whale4343PSV o ka sebelisoa haholo sebakeng sa bongaka, sa indasteri, sa bongaka ba liphoofolo le sa lipatlisiso.
Boemo bo phahameng ba matla
Nako e telele ea bophelo
Thekenoloji | |
Sensoro | A-Si |
Scintillator | GOS / CSI |
Sebaka se sebetsang | 430 x 430 limilimithara |
Pixel Matrix | 3072 x 3072 |
Pixel Pitch | 140 μm |
AD Phetoho | 16 likotoana |
Sehokedi | |
Sehokelo sa Puisano | Gigabit Ethernet |
Taolo ea Ho pepeseha | Hlahisa ho (Edge kapa Level) / Trigger Out (Edge kapa Level) |
Nako ea ho Fumana Litšoantšo | ≤1 metsotsoana |
Mokhoa oa tšebetso | Windows7 / Windows10 OS 32 bits kapa 64 bits |
Ts'ebetso ea Setsebi | |
Qeto | 3.5 lp/mm |
Range ea Matla | 40-160 KV |
Lag | ≤1% 1st foreimi |
Dynamic Range | ≥86dB |
Kutloelo-bohloko | 540 lsb/uGy |
SNR | 48 dB @(20000lsb) |
MTF | 70% @(1 lp/mm) |
38% @(2 lp/mm) | |
21% @(3 lp/mm) | |
DQE | 58% @(0 lp/mm) |
41% @(1 lp/mm) | |
25% @(2 lp/mm) | |
Mechini | |
Bophahamo(H x W x D) | 460 x 460 x 15 limilimithara |
Boima ba 'mele | 4.6 Kg |
Boitsebiso ba Tšireletso ea Sensor | Fiber ea Carbon |
Thepa ea Matlo | Matla a Phahameng a Aluminium Alloy |
Tikoloho | |
Mocheso Range | 10~35℃(e sebetsa);-10~50℃(bobolokelo) |
Mongobo | 30 ~ 70% RH(ha e kolekese) |
Ho thothomela | IEC/EN 60721-3 sehlopha sa 2M3(10~150 Hz,0.5 g) |
Ho tshoha | IEC/EN 60721-3 sehlopha sa 2M3(11 ms,2 g) |
E Hanela Lerōle le Metsi | IPX0 |
Matla | |
Phepelo | 100 ~ 240 VAC |
Khafetsa | 50/60 Hz |
Tshebediso | 14W |
Kopo | |
Ngaka ea liphoofolo | Teko ea bongaka ba liphoofolo tse ruuoang lapeng |
Mechanical Dimension | |
Moenjineri ea tšoanelehang oa R&D o tla ba teng bakeng sa ts'ebeletso ea hau ea lipuisano mme re tla leka ka hohle ho fihlela litlhoko tsa hau.Kahoo ka kopo ikutloe u lokolohile ho ikopanya le rona bakeng sa lipotso.U tla khona ho re romella mangolo-tsoibila kapa ho re letsetsa.Hape o khona ho tla khoebong ea rona u le mong ho tseba haholoanyane ka rona.'Me ka sebele re tla u fa khotheishene e ntle ka ho fetisisa le tšebeletso ea ka mor'a thekiso.Re ikemiselitse ho theha likamano tse tsitsitseng le tse mosa le barekisi ba rona.Ho fihlela katleho ka bobeli, re tla etsa boiteko bo matla ba ho aha tšebelisano-'moho e tiileng le mosebetsi oa puisano o pepeneneng le balekane ba rona.Ka holim'a tsohle, re mona ho amohela lipotso tsa hau bakeng sa thepa le litšebeletso tsa rona.
Sehlopha sa rona sa litsebi tsa boenjiniere ka kakaretso se tla itokisetsa ho u sebeletsa bakeng sa lipuisano le maikutlo.Maiteko a matle a tla hlahisoa ho u fa litšebeletso le thepa e ntle ka ho fetisisa.Ha u chesehela khoebo le lihlahisoa tsa rona, ka kopo bua le rona ka ho re romella mangolo-tsoibila kapa ho re letsetsa kapele.Maitekong a ho tseba lihlahisoa tsa rona le k'hamphani e eketsehileng, u ka tla fekthering ea rona ho tla e shebella.Ka kakaretso re tla amohela baeti ba tsoang lefats'eng lohle ho tla khoebong ea rona ho theha likamano tsa khoebo le rona.
Lihlahisoa tsa rona li hapile botumo bo botle ho e 'ngoe le e 'ngoe ea lichaba tse amanang.Hobane ho theha feme ea rona.re tsitlalletse ho nchafatsa mokhoa oa rona oa tlhahiso hammoho le mokhoa oa morao-rao oa tsamaiso ea mehleng ea kajeno, ho hohela batho ba bangata ba nang le talenta indastering ena.Re nka tharollo ea boleng bo botle e le semelo sa rona sa bohlokoahali.