Tlhahiso ea Whale4343FQM ke mofuta o tsitsitseng le lerata le tlaase la x-ray flat panel detector e thehiloeng ho theknoloji ea silicon ea amorphous.A-Si thekenoloji e thehiloeng ho theknoloji e na le melemo e mengata e sa fumaneheng ka theknoloji e 'ngoe, tlhahiso ea Whale4343FQM e nka boleng bo phahameng ba setšoantšo le mefuta e mengata e matla, hape Whale4343FQM e na le mekhahlelo e mengata, ts'ebetso ena e etsa hore ho khonehe hore detector e ka ba e loketseng. kutlo e phahameng le litlhoko tse kholo tsa mefuta e fapaneng.Ho ipapisitsoe le litšoaneleho tse kaholimo, mochini oa Whale4343FQM o ka sebelisoa haholo ho Radiography & Fluoroscopy (12fps) le Dynamic Radiography.
Thekenoloji | |
Sensoro | A-Si |
Scintillator | CSI / GOS |
Sebaka se sebetsang | 430 x 430 limilimithara |
Pixel Matrix | 3072 x 3072 |
Pixel Pitch | 140 μm |
AD Phetoho | 16 likotoana |
Sehokedi | |
Sehokelo sa Puisano | Fiber ea Optical |
Taolo ea Ho pepeseha | Pulse Sync In(Edge kapa Level) / Pulse Sync Out(Edge kapa Level) |
Mokhoa | Software Mode / HVG Sync Mode / FPD Sync Mode |
Lebelo la Frame | 12fps(1x1) / 24fps(2x2) |
Mokhoa oa tšebetso | Windows7 / Windows10 OS 32 bits kapa 64 bits |
Ts'ebetso ea Setsebi | |
Qeto | 3.5 lp/mm |
Range ea Matla | 40-160 KV |
Lag | 0.8% @1st foreimi |
Dynamic Range | ≥86dB |
Kutloelo-bohloko | 620 lsb/uGy |
SNR | 48 dB @(20000lsb) |
MTF | 72% @(1 lp/mm) |
44% @(2 lp/mm) | |
25% @(3 lp/mm) | |
DQE | 55% @(0 lp/mm) |
41% @(1 lp/mm) | |
28% @(2 lp/mm) | |
Mechini | |
Bophahamo(H x W x D) | 470x 470 x 30 limilimithara |
Boima ba 'mele | 5 Kg |
Boitsebiso ba Tšireletso ea Sensor | Fiber ea Carbon |
Thepa ea Matlo | Aluminium Alloy |
Tikoloho | |
Mocheso Range | 10~35℃(e sebetsa);-10~50℃(bobolokelo) |
Mongobo | 30 ~ 70% RH(ha e kolekese) |
Ho thothomela | IEC/EN 60721-3 sehlopha sa 2M3(10~150 Hz,0.5 g) |
Ho tshoha | IEC/EN 60721-3 sehlopha sa 2M3(11 ms,2 g) |
E Hanela Lerōle le Metsi | IPX0 |
Matla | |
Phepelo | 100 ~ 240 VAC |
Khafetsa | 50/60 Hz |
Tshebediso | 14W |
Kopo | |
Bongaka | Radiography le Fluoroscopy(12fps) |
Mechanical Dimension | |
Sehlahisoa se seng le se seng se entsoe ka hloko, se tla etsa hore u khotsofale.Lihlahisoa tsa rona ts'ebetsong ea tlhahiso li behiloe leihlo ka thata, hobane ke feela ho u fa boleng bo holimo, re tla ikutloa re le sebete.Litšenyehelo tse phahameng tsa tlhahiso empa theko e tlase bakeng sa tšebelisano ea rona ea nako e telele.U ka ba le likhetho tse fapaneng mme boleng ba mefuta eohle bo ts'epahalla.Haeba u na le potso, u seke oa tsilatsila ho re botsa.
Sehlopha sa rona sa litsebi tsa boenjiniere se tla lula se ikemiselitse ho u sebeletsa bakeng sa lipuisano le maikutlo.Re boetse re khona ho u fa lisampole tsa mahala ho fihlela litlhoko tsa hau.Ho tla etsoa boiteko bo matla ho u fa litšebeletso le thepa e nepahetseng.Bakeng sa mang kapa mang ea nahanang ka k'hamphani le thepa ea rona, ka kopo ikopanye le rona ka ho re romella mangolo-tsoibila kapa ho ikopanya le rona kapele.E le mokhoa oa ho tseba lihlahisoa tsa rona le tse tiileng.tse ling tse ngata, u ka tla fekthering ea rona ho tla tseba.Re tla lula re amohela baeti ba tsoang lefats'eng lohle ho tla khoebong ea rona ho theha likamano tsa khampani le rona.Ka kopo, ikutloe u lokolohile ho ikopanya le rona bakeng sa khoebo mme re lumela hore re tla arolelana boiphihlelo bo holimo ba khoebo le barekisi bohle ba rona.
Ts'ebeletso ea hang-hang le e ikhethang kamora thekiso e fanoeng ke sehlopha sa rona sa baeletsi e thabisa bareki ba rona.Lintlha tse felletseng le litlhophiso tsa thepa li tla romelloa ho uena bakeng sa kananelo efe kapa efe e phethahetseng.Mehlala ea mahala e ka tlisoa 'me k'hamphani e sheba k'hamphani ea rona.Ke ts'epa hore u tla fumana lipotso 'me u thehe tšebelisano-'moho ea nako e telele.