Tlhahiso ea Whale3030FPI ke mofuta o tsitsitseng le molumo o tlase oa x-ray flat panel detector e thehiloeng ho theknoloji ea silicon ea amorphous.Sesebelisoa sa theknoloji ea A-Si se na le melemo e mengata e sa fumaneheng ka theknoloji e 'ngoe, Tlhahiso ea Whale3030FPI e nka boleng bo holimo ba setšoantšo le mefuta e mengata e matla, hape Whale3030FPI e na le mekhahlelo e mengata ea phaello, ts'ebetso ena e etsa hore ho khonehe hore mochine o khone ho sebetsa ka bobeli. kutlo e phahameng le litlhoko tse kholo tsa mefuta e fapaneng.Ho ipapisitsoe le litšoaneleho tse kaholimo, sesebelisoa sa Whale3030FPI se ka sebelisoa haholo ho NDT, Electronics, X Ray Chip Counter, kopo ea CT ea indasteri.
Boemo bo phahameng ba matla
Nako e telele ea bophelo
| Thekenoloji | |
| Sensoro | A-Si |
| Scintillator | CSI / GOS |
| Sebaka se sebetsang | 286 x 286 limilimithara |
| Pixel Matrix | 2048 x 2048 |
| Pixel Pitch | 140 μm |
| AD Phetoho | 16 likotoana |
| Sehokedi | |
| Sehokelo sa Puisano | Fiber ea Optical |
| Taolo ea Ho pepeseha | Pulse Sync In(Edge kapa Level) / Pulse Sync Out(Edge kapa Level) |
| Mokhoa | Software Mode/HVG Sync Mode/ FPD Sync Mode |
| Lebelo la Frame | 18fps(1x1) |
| Mokhoa oa tšebetso | Windows7 / Windows10 OS 32 bits kapa 64 bits |
| Ts'ebetso ea Setsebi | |
| Qeto | 3.5 lp/mm |
| Range ea Matla | 40-160 KV |
| Lag | 0.8% @1st foreimi |
| Dynamic Range | ≥86dB |
| Kutloelo-bohloko | 620 lsb/uGy |
| SNR | 48 dB @(20000lsb) |
| MTF | 72% @(1 lp/mm) |
| 44% @(2 lp/mm) | |
| 25% @(3 lp/mm) | |
| DQE | 55% @(0 lp/mm) |
| 41% @(1 lp/mm) | |
| 28% @(2 lp/mm) | |
| Mechini | |
| Bophahamo(H x W x D) | 322 x 322x 46.5 limilimithara |
| Boima ba 'mele | 5.5 Kg |
| Boitsebiso ba Tšireletso ea Sensor | Fiber ea Carbon |
| Thepa ea Matlo | Aluminium Alloy |
| Tikoloho | |
| Mocheso Range | 10~35°℃(e sebetsa);-10~50℃(bobolokelo) |
| Mongobo | 30 ~ 70% RH(ha e kolekese) |
| Ho thothomela | IEC/EN 60721-3 sehlopha sa 2M3(10~150 Hz,0.5 g) |
| Ho tshoha | IEC/EN 60721-3 sehlopha sa 2M3(11 ms,2 g) |
| E Hanela Lerōle le Metsi | IPX0 |
| Matla | |
| Phepelo | 100 ~ 240 VAC |
| Khafetsa | 50/60 Hz |
| Tshebediso | 10W |
| Taolo | |
| CFDA (Chaena) |
|
| FDA (USA) |
|
| CE (Europe) |
|
| Kopo | |
| Indasteri | CT ea indasteri |
| Mechanical Dimension | |
|
| |
Ke mehlala ea nako e telele 'me e phatlalatsoa hantle lefatšeng ka bophara.E tataisoa ke molao-motheo oa Prudence, Efficiency, Union and Innovation.khoebo e etsa boiteko bo matla ba ho holisa khoebo ea eona ea machabeng, ho phahamisa khoebo ea eona.rofit le ho ntlafatsa sekala sa eona sa thomello.Re na le ts'epo ea hore re tla ba le tebello e matla 'me re tla phatlalatsoa lefatšeng lohle lilemong tse tlang.
Litharollo tsa rona li na le litlhoko tsa tumello ea naha bakeng sa lintho tse tšoanelehang, tsa boleng bo botle, boleng bo theko e tlaase, e ile ea amoheloa ke batho lefatšeng ka bophara.Thepa ea rona e tla tsoela pele ho ntlafala ka har'a odara mme e bonahala e labalabela ho sebelisana le uena, Ka 'nete haeba efe kapa efe ea lintho tseo e ka ba ea bohlokoa ho uena, ka kopo, re tsebise.Re tla khotsofatsoa ke ho u fa khotheishene hang ha re fumana litlhoko tse felletseng.
Kaofela re nahana hore joale re na le bokhoni bo felletseng ba ho u hlahisa ka thepa e khotsofatsang.Takatso ea ho bokella likopo tsa lintho tsa hau le ho hlahisa tšebelisano-'moho ea nako e telele.Re ts'episa ka botebo: boleng bo holimo, theko e ntle;theko e tšoanang ea thekiso, boleng bo holimo.
Lihlopha tsa lihlahisoa
-
Whale4343PSV A-Si letoto la Veterinary X Ray Detector
-
Whale3025FPI A-Si Setsi se Tsitsitseng sa indasteri ea X-Ray
-
Whale3030FQM-H A-Si Setsi sa Bongaka se Tsitsitseng sa X-Ray
-
Whale1613FDI-UM Mofuta o tsitsitseng oa Indasteri X-ray Det...
-
Whale1613FDM A-Si letoto la bongaka la X-Ray Detector
-
Whale4343FQM-H A-Si Setsi sa Bongaka se Tsitsitseng sa X-Ray
