Tlhahiso ea Whale3025FQI ke mofuta o tsitsitseng le lerata le tlaase la x-ray flat panel detector e thehiloeng ho theknoloji ea silicon ea amorphous.Sesebelisoa sa theknoloji ea A-Si se na le melemo e mengata e sa fumaneheng ka theknoloji e 'ngoe kutlo e phahameng le litlhoko tse kholo tsa mefuta e fapaneng.Ho ipapisitsoe le litšoaneleho tse kaholimo, sebui sa Whale3025FQI se ka sebelisoa haholo sebakeng sa bongaka, indasteri, bongaka ba liphoofolo le sebaka sa kopo ea lipatlisiso.
Boemo bo phahameng ba matla
Nako e telele ea bophelo
Thekenoloji | |
Sensoro | A-Si |
Scintillator | CSI / GOS |
Sebaka se sebetsang | 250 x 286 limilimithara |
Pixel Matrix | 1792 x 2048 |
Pixel Pitch | 140 μm |
AD Phetoho | 16 likotoana |
Sehokedi | |
Sehokelo sa Puisano | Gigabit Ethernet |
Taolo ea Ho pepeseha | Pulse Sync In(Edge kapa Level) / Pulse Sync Out(Edge kapa Level) |
Mokhoa | Software Mode/HVG Sync Mode/ FPD Sync Mode |
Lebelo la Frame | 10fps(1x1) |
Mokhoa oa tšebetso | Windows7 / Windows10 OS 32 bits kapa 64 bits |
Ts'ebetso ea Setsebi | |
Qeto | 3.5 lp/mm |
Range ea Matla | 40-160 KV |
Lag | ≤1% @1st foreimi |
Dynamic Range | ≥86dB |
Kutloelo-bohloko | 540 lsb/uGy |
SNR | 48 dB @(20000lsb) |
MTF | 70% @(1 lp/mm) |
38% @(2 lp/mm) | |
21% @(3 lp/mm) | |
DQE | 58% @(0 lp/mm) |
41% @(1 lp/mm) | |
25% @(2 lp/mm) | |
Mechini | |
Bophahamo(H x W x D) | 322 x 285x 46.5 limilimithara |
Boima ba 'mele | 2.5 Kg |
Boitsebiso ba Tšireletso ea Sensor | Fiber ea Carbon |
Thepa ea Matlo | Aluminium Alloy |
Tikoloho | |
Mocheso Range | 10~35℃(e sebetsa);-10~50℃(bobolokelo) |
Mongobo | 30 ~ 70% RH(ha e kolekese) |
Ho thothomela | IEC/EN 60721-3 sehlopha sa 2M3(10~150 Hz,0.5 g) |
Ho tshoha | IEC/EN 60721-3 sehlopha sa 2M3(11 ms,2 g) |
E Hanela Lerōle le Metsi | IPX0 |
Matla | |
Phepelo | 100 ~ 240 VAC |
Khafetsa | 50/60 Hz |
Tshebediso | 10W |
Taolo | |
CFDA (Chaena) |
|
FDA (USA) |
|
CE (Europe) |
|
Kopo | |
Indasteri | Tlhahlobo ea SMT, Electronics, Lithium Battery le Chip Wire Bonding |
Mechanical Dimension | |
Re beha boleng ba sehlahisoa le melemo ea bareki sebakeng sa pele.Bahoebi ba rona ba nang le phihlelo ba fana ka litšebeletso tse potlakileng le tse sebetsang hantle.Sehlopha sa taolo ea boleng etsa bonnete ba boleng bo botle ka ho fetisisa.Re lumela hore boleng bo tsoa ho lintlha.Haeba u na le tlhoko, a re sebetseng 'moho ho fumana katleho.
Kamora lilemo tsa ho theha le ho nts'etsapele, ka melemo ea litalenta tse koetlisitsoeng le boiphihlelo bo bongata ba ho bapatsa, katleho e ikhethang e ile ea etsoa butle-butle.Re fumana botumo bo botle ho tsoa ho bareki ka lebaka la boleng ba lihlahisoa tsa rona le ts'ebeletso e ntle ea kamora ho rekisa.Re lakatsa ka tieo ho theha bokamoso bo atlehileng le bo atlehileng haholoanyane hammoho le metsoalle eohle ea hae le kantle ho naha!
Ho phehella ho "Boleng bo phahameng, Phano e Potlakileng, Theko ea Tlholisano", re thehile tšebelisano ea nako e telele le bareki ba tsoang mose ho maoatle le ka hare ho naha mme re fumana litlhaloso tse phahameng tsa bareki ba bacha le ba khale.Ke tlotla ea rona e kholo ho fihlela litlhoko tsa hau.Re lebelletse tlhokomelo ea hau ka tieo.
Ho hapa tšepo ea bareki, Mohloli o Molemo ka ho Fetisisa o thehile sehlopha se matla sa thekiso le ka mor'a thekiso ho fana ka sehlahisoa le tšebeletso e ntle ka ho fetisisa.Mohloli o Molemo ka ho Fetisisa o latela mohopolo oa "Hola le moreki" le filosofi ea "E sekametseng ho Bareki" ho fihlela tšebelisano 'moho ea ho tšepana le ho thusa.Ha re holeng hammoho!
Re tla qala mohato oa bobeli oa leano la rona la nts'etsopele.Khamphani ea rona e nka "litheko tse loketseng, nako e nepahetseng ea tlhahiso le ts'ebeletso e ntle ea kamora ho rekisa" e le molao oa rona.Haeba u thahasella lihlahisoa leha e le life tsa rona kapa u ka rata ho buisana ka taelo e tloaelehileng, ka kopo ikutloe u lokolohile ho ikopanya le rona.Re labalabela ho theha likamano tse atlehileng tsa khoebo le bareki ba bacha lefatšeng ka bophara haufinyane.