Tlhahiso ea Whale1613FDI ke mofuta o tsitsitseng le lerata le tlaase la x-ray flat panel detector e thehiloeng ho theknoloji ea silicon ea amorphous.A-Si thekenoloji e thehiloeng ho lisebelisoa e na le melemo e mengata e sa fumaneheng ka theknoloji e 'ngoe kutlo e phahameng le litlhoko tse kholo tsa mefuta e fapaneng.Ho itšetlehile ka litšobotsi tse ka holimo, mochine oa Whale1613FDI o ka sebelisoa haholo ho SMT ea indasteri, lisebelisoa tsa elektronike, tlhahlobo ea lithium battery chip wire bonding.
Boemo bo phahameng ba matla
Nako e telele ea bophelo
Thekenoloji | |
Sensoro | A-Si |
Scintillator | GOS / CSI |
Sebaka se sebetsang | 160 x 128 limilimithara |
Pixel Matrix | 1024 x 1248 |
Pixel Pitch | 125 μm |
AD Phetoho | 16 likotoana |
Sehokedi | |
Sehokelo sa Puisano | Gigabit Ethernet |
Taolo ea Ho pepeseha | Pulse Sync In (Edge kapa Level) / Pulse Sync Out (Moeli kapa Boemo) |
Mokhoa | Software Mode / HVG Sync Mode / FPD Sync Mode |
Lebelo la Frame | 30fps |
Mokhoa oa tšebetso | Windows7 / Windows10 OS 32 bits kapa 64 bits |
Ts'ebetso ea Setsebi | |
Qeto | 4.0 lp/mm |
Range ea Matla | 40-160 KV |
Lag | 0.8% @1st foreimi |
Dynamic Range | ≥86dB |
Kutloelo-bohloko | 460 lsb/uGy |
SNR | 49 dB @(20000lsb) |
MTF | 75% @(1 lp/mm) |
46% @(2 lp/mm) | |
27% @(3 lp/mm) | |
DQE | 58% @(0 lp/mm) |
43% @(1 lp/mm) | |
30% @(2 lp/mm) | |
Mechini | |
Dimension(HxWxD) | 196 x 162 x 37.5 limilimithara |
Boima ba 'mele | 1.5 Kg |
Boitsebiso ba Tšireletso ea Sensor | Fiber ea Carbon |
Thepa ea Matlo | Aluminium Alloy |
Tikoloho | |
Mocheso Range | 10 ~ 35℃(e sebetsang);-10~50℃(bolokelo) |
Mongobo | 30 ~ 70% RH(ha e kolekese) |
Ho thothomela | IEC/EN 60721-3 sehlopha sa 2M3(10~150 Hz, 0.5 g) |
Ho tshoha | IEC/EN 60721-3 sehlopha sa 2M3(11 ms, 2 g) |
E Hanela Lerōle le Metsi | IPX0 |
Matla | |
Phepelo | 100 ~ 240 VAC |
Khafetsa | 50/60 Hz |
Tshebediso | 8W |
Kopo | |
Indasteri | SMT, Electronics, Lithium Battery Chip le Wire Bonding Inspection |
Mechanical Dimension | |