Tlhahiso ea Shark2323FPM ke mofuta o tsitsitseng le molumo o tlaase oa x ray flat panel detector e thehiloeng ho theknoloji ea Indium Gallium Zinc Oxide.Sesebelisoa sa theknoloji sa IGZO se na le melemo e mengata e sa fumaneheng ka mahlale a mang, tlhahiso ea Shark2323FPM e nka boleng bo holimo ba setšoantšo, lebelo la foreimi, le sebaka se seholo sa matla, hape Shark2323FPM e na le sethala sa phaello e ngata, ts'ebetso ena e etsa hore ho khonehe hore detector e ka ba ka bobeli. e loketse kutloisiso e phahameng le litlhoko tse kholo tsa mefuta e mengata.Ho ipapisitsoe le litšoaneleho tse kaholimo, sebui sa Shark2323FPM se ka sebelisoa haholo libakeng tsa bongaka, tsa indasteri, tsa bongaka ba liphoofolo le tsa lipatlisiso.
Lebelo le phahameng la foreimi
Boleng bo phahameng ba setšoantšo
Thekenoloji | |
Sensoro | IGZO |
Scintillator | CSI/ GOS |
Sebaka se sebetsang | 227 x 227 limilimithara |
Pixel Matrix | 1536 x 1536 |
Pixel Pitch | 148 μm |
AD Phetoho | 16 likotoana |
Sehokedi | |
Sehokelo sa Puisano | Gigabit Ethernet |
Taolo ea Ponahalo | Pulse Sync In (Edge kapa Level) / Pulse Sync Out (Edge kapa Level) |
Mokhoa oa ho sebetsa | Software Mode / HVG Sync Mode / FPD Sync Mode |
Lebelo la Frame | 12fps (1x1) / 50fps (2x2) |
Mokhoa oa tšebetso | Windows7 / Windows10 OS 32 bits kapa 64 bits |
Ts'ebetso ea Setsebi | |
Qeto | 3.37 lp/mm |
Range ea Matla | 40-160 KV |
Lag | ≤0.8% 1st foreimi |
Dynamic Range | ≥88dB |
Kutloelo-bohloko | 740 lsb/uGy |
SNR | 50 dB @(20000lsb) |
MTF | 60% @(1 lp/mm) |
25% @(2 lp/mm) | |
10% @(3 lp/mm) | |
DQE (2uGy) | 65% @(0 lp/mm) |
45% @(1 lp/mm) | |
30% @(2 lp/mm) | |
Mechini | |
Bophahamo(H x W x D) | 268 x 265 x 28 limilimithara |
Boima ba 'mele | 2.8 Kg |
Boitsebiso ba Tšireletso ea Sensor | Fiber ea Carbon |
Thepa ea Matlo | Aluminium Alloy |
Tikoloho | |
Mocheso Range | 10 ~ 35 ° ℃ (e sebetsang);-10 ~ 50 ℃ (bobolokelo) |
Mongobo | 30 ~ 70% RH(ha e kolekese) |
Ho thothomela | IEC/EN 60721-3 sehlopha sa 2M3(10~150 Hz, 0.5 g) |
Ho tshoha | IEC/EN 60721-3 sehlopha sa 2M3(11 ms, 2 g) |
E Hanela Lerōle le Metsi | IPX0 |
Matla | |
Phepelo | 100 ~ 240 VAC |
Khafetsa | 50/60 Hz |
Tshebediso | 10W |
Taolo | |
CFDA (Chaena) | |
FDA (USA) | |
CE (Europe) | |
Kopo | |
Bongaka | Litšoantšo tsa dijithale tsa C-arm ea bongaka Sebopeho sa setšoantšo se matlafatsa le ho ntlafatsa Cone-beam computed tomography (CBCT) |
Mechanical Dimension | |
Kaha ke litharollo tse holimo fekthering ea rona, letoto la litharollo tsa rona le lekoa mme la re hapa litifikeiti tsa bolaoli tse nang le boiphihlelo.Bakeng sa lintlha tse ling le lintlha tsa lethathamo la lintho, ka kopo, tobetsa konopo ho fumana lintlha tse eketsehileng.
Ka kopo, ikutloe u lokolohile ho re romella lintlha tsa hau 'me re tla u araba kapele.Re na le sehlopha sa profeshenale sa boenjiniere ho sebeletsa litlhoko tsohle tse qaqileng.Mehlala ea mahala e ka romelloa uena ka bouena ho tseba lintlha tse ngata.E le hore u tsebe ho fihlela litakatso tsa hau, ka kopo ikutloe u lokolohile ho ikopanya le rona.O ka re romella mangolo-tsoibila mme oa re letsetsa hang-hang.Ho feta moo, re thabela ho etela fektheri ea rona ho tsoa lefats'eng lohle bakeng sa ho tsebahatsa mokhatlo oa rona hamolemo.Khoebong ea rona le bahoebi ba linaha tse 'maloa, hangata re khomarela molao-motheo oa ho lekana le ho thusana.Ke tšepo ea rona ho rekisa, ka boiteko bo kopanetsoeng, khoebo le setsoalle molemong oa rona.Re labalabela ho fumana lipotso tsa hau.
Lihlahisoa tsa rona li hlahisoa ka lisebelisoa tse ntle ka ho fetisisa tse tala.Ka motsotso o mong le o mong, re lula re ntlafatsa lenaneo la tlhahiso.E le ho netefatsa boleng bo ntlafetseng le tšebeletso, re 'nile ra tsepamisa maikutlo mosebetsing oa tlhahiso.Re fumane thoriso e phahameng ke balekane.Re labalabela ho theha likamano tsa khoebo le uena.