Whale1613FDI kugadzirwa imhando yakagadziriswa uye yakaderera ruzha x-ray flat panel detector yakavakirwa paamorphous silicon tekinoroji.A-Si tekinoroji yakavakirwa detector ine mabhenefiti akawanda asingawanikwe neimwe tekinoroji, Whale1613FDI kugadzirwa kunotora mufananidzo wemhando yepamusoro uye yakakura ine simba renji, zvakare Whale1613FDI ine nhanho yekuwana yakawanda, basa iri rinoita kuti zvikwanise kuti detector ikwane. high sensitivity uye yakakura dynamic range zvinodiwa.Kubva pane hunhu huri pamusoro, Whale1613FDI detector inogona kushandiswa zvakanyanya muindasitiri SMT, zvemagetsi, lithium bhatiri chip waya bonding inspection.
High dynamic range
Nguva refu yehupenyu
Vadivelu Comedy Technology | |
Sensor | A-Si |
Scintillator | GOS / CSI |
Active Area | 160 x 128 mm |
Pixel Matrix | 1024 x 1248 |
Pixel Pitch | 125 μm |
AD Shanduko | 16 zvishoma |
Interface | |
Communication Interface | Gigabit Ethernet |
Exposure Control | Pulse Sync Mu (Edge kana Level) / Pulse Sync Out (Edge kana Level) |
Mode | Software Mode / HVG Sync Mode / FPD Sync Mode |
Frame Speed | 30fps |
Operating System | Windows7 / Windows10 OS 32 bits kana 64 bits |
Kushanda Kwehunyanzvi | |
Resolution | 4.0 lp/mm |
Energy Range | 40-160 KV |
Lag | 0.8% @1st furemu |
Dynamic Range | ≥ 86dB |
Sensitivity | 460 lsb/uGy |
SNR | 49 dB @(20000lsb) |
MTF | 75% @(1 lp/mm) |
46% @(2 lp/mm) | |
27% @(3 lp/mm) | |
DQE | 58% @(0 lp/mm) |
43% @(1 lp/mm) | |
30% @(2 lp/mm) | |
Mechanical | |
Dimension(HxWxD) | 196 x 162 x 37.5 mm |
Kurema | 1.5 Kg |
Sensor Dziviriro Material | Carbon Fiber |
Housing Material | Aluminium Alloy |
Environmental | |
Temperature Range | 10 ~ 35 ℃ (kushanda);-10 ~ 50 ℃(kuchengeta) |
Humidity | 30 ~ 70% RH (isina-condensing) |
Vibration | IEC/EN 60721-3 kirasi 2M3(10~150 Hz, 0.5 g) |
Shock | IEC/EN 60721-3 kirasi 2M3(11 ms, 2 g) |
Dust uye Mvura Inodzivirira | IPX0 |
Simba | |
Supply | 100 ~ 240 VAC |
Frequency | 50/60 Hz |
Kushandiswa | 8W |
Application | |
Indasitiri | SMT, Electronics, Lithium Battery Chip uye Wire Bonding Inspection |
Mechanical Dimension | |