Rapid Delivery for Industrial Gis Inspection - Dolphin0606FDI CMOS Industrial X-ray detector – haobo

Short Description:

Send email to us

Product Detail

Product Tags

Feedback (2)

we are able to provide good quality items, aggressive rate and best shopper assistance. Our destination is "You come here with difficulty and we provide you with a smile to take away" for Phosphor Screen Detector, Medical 3d Image, Dynamic Digital Radiography, Welcome to contact us if you are interested in our product, we will give you a surprice for Qulity and Price.

Rapid Delivery for Industrial Gis Inspection - Dolphin0606FDI CMOS Industrial X-ray detector – haobo Detail:

Dolphin0606FDI production is a fixed type and low noise x-ray flat panel detector based on CMOS. CMOS sensors use a single crystal silicon process for chip fabrication. Direct integral amplification within pixel cells leads to lower electronic noise, higher signal-to-noise ratio, and higher quantum detection efficiency (DQE) than amorphous silicon, so CMOS sensors are particularly suitable for low-dose imaging scenarios. Based on above characteristics, Dolphin0606FDI detector can be widely used in industrial SMT, electronics, lithium battery and chip wire bonding inspection.

Electronic noise is lower

Higher signal-to-noise ratio

Technology
Sensor	CMOS
Scintillator	CSI
Active Area	60 x 53.5 mm
Pixel Matrix	1200 x 1056
Pixel Pitch	50 μm
AD Conversion	14 bits
Interface
Communication Interface	Optical Fiber
Exposure Control	Pulse Sync In (Edge or Level) / Pulse Sync Out (Edge or Level)
Work Mode	Software Mode / HVG Sync Mode / FPD Sync Mode
Frame Speed	51fps (1×1)
Operating System	Windows7 / Windows10 OS 32 bits or 64 bits
Technical Performance
Resolution	10.0 lp/mm
Energy Range	40~160 KV
Lag	0.01% @1st frame
Dynamic Range	≥ 73dB
Sensitivity	100 lsb/uGy
SNR	48 dB @(20000lsb)
MTF	90% @(1 lp/mm)
	82% @(2 lp/mm)
	74% @(3 lp/mm)
DQE (2uGy)	65% @(0 lp/mm)
	48% @(1 lp/mm)
	37% @(2 lp/mm)
Mechanical
Dimension(H x W x D)	171 x 171 x 37 mm
Weight	2.8 Kg
Sensor Protection Material	Carbon Fiber
Housing Material	Aluminum Alloy
Environmental
Temperature Range	10~35°℃ (operating); -10~50℃(storage)
Humidity	30~70% RH(non-condensing)
Vibration	IEC/EN 60721-3 class 2M3(10~150 Hz,0.5 g)
Shock	IEC/EN 60721-3 class 2M3(11 ms,2 g)
Dust and Water Resistant	IPX0
Power
Supply	100~240 VAC
Frequency	50/60 Hz
Consumption	6 W
Application
Industrial	SMT, Electronics, Lithium Battery Chip Wire Bonding Inspection
Mechanical Dimension

Product detail pictures:

Related Product Guide:

With state-of-the-art technologies and facilities, strict good quality regulate, reasonable cost, exceptional assistance and close co-operation with prospects, we're devoted to supplying the top benefit for our customers for Rapid Delivery for Industrial Gis Inspection - Dolphin0606FDI CMOS Industrial X-ray detector – haobo , The product will supply to all over the world, such as: Rome, Liverpool, Macedonia, We are sincerely looking forward to cooperate with customers all over the world. We believe we can satisfy you with our high-quality products and perfect service . We also warmly welcome customers to visit our company and purchase our products.

3d Cone Scan Teeth