Professional Design Amorphous Selenium Detector - Dolphin0606FDI CMOS Industrial X-ray detector – haobo Detail:
Dolphin0606FDI production is a fixed type and low noise x-ray flat panel detector based on CMOS. CMOS sensors use a single crystal silicon process for chip fabrication. Direct integral amplification within pixel cells leads to lower electronic noise, higher signal-to-noise ratio, and higher quantum detection efficiency (DQE) than amorphous silicon, so CMOS sensors are particularly suitable for low-dose imaging scenarios. Based on above characteristics, Dolphin0606FDI detector can be widely used in industrial SMT, electronics, lithium battery and chip wire bonding inspection.
Electronic noise is lower
Higher signal-to-noise ratio
|
Technology |
|
|
Sensor |
CMOS |
|
Scintillator |
CSI |
|
Active Area |
60 x 53.5 mm |
|
Pixel Matrix |
1200 x 1056 |
|
Pixel Pitch |
50 μm |
|
AD Conversion |
14 bits |
|
Interface |
|
|
Communication Interface |
Optical Fiber |
|
Exposure Control |
Pulse Sync In (Edge or Level) / Pulse Sync Out (Edge or Level) |
|
Work Mode |
Software Mode / HVG Sync Mode / FPD Sync Mode |
|
Frame Speed |
51fps (1×1) |
|
Operating System |
Windows7 / Windows10 OS 32 bits or 64 bits |
|
Technical Performance |
|
|
Resolution |
10.0 lp/mm |
|
Energy Range |
40~160 KV |
|
Lag |
0.01% @1st frame |
|
Dynamic Range |
≥ 73dB |
|
Sensitivity |
100 lsb/uGy |
|
SNR |
48 dB @(20000lsb) |
|
MTF |
90% @(1 lp/mm) |
|
82% @(2 lp/mm) |
|
|
74% @(3 lp/mm) |
|
|
DQE (2uGy) |
65% @(0 lp/mm) |
|
48% @(1 lp/mm) |
|
|
37% @(2 lp/mm) |
|
|
Mechanical |
|
|
Dimension(H x W x D) |
171 x 171 x 37 mm |
|
Weight |
2.8 Kg |
|
Sensor Protection Material |
Carbon Fiber |
|
Housing Material |
Aluminum Alloy |
|
Environmental |
|
|
Temperature Range |
10~35°℃ (operating); -10~50℃(storage) |
|
Humidity |
30~70% RH(non-condensing) |
|
Vibration |
IEC/EN 60721-3 class 2M3(10~150 Hz,0.5 g) |
|
Shock |
IEC/EN 60721-3 class 2M3(11 ms,2 g) |
|
Dust and Water Resistant |
IPX0 |
|
Power |
|
|
Supply |
100~240 VAC |
|
Frequency |
50/60 Hz |
|
Consumption |
6 W |
|
Application |
|
|
Industrial |
SMT, Electronics, Lithium Battery Chip Wire Bonding Inspection |
|
Mechanical Dimension |
|
Product detail pictures:
Related Product Guide:
We offer wonderful energy in high-quality and improvement,merchandising,product sales and marketing and advertising and procedure for Professional Design Amorphous Selenium Detector - Dolphin0606FDI CMOS Industrial X-ray detector – haobo , The product will supply to all over the world, such as: Puerto Rico, USA, Guinea, Our products are widely sold to Europe, USA, Russia, UK, France, Australia, Middle East, South America, Africa, and Southeast Asia, etc. Our products are highly recognized by our customers from all around the world. And our company is committed to continually improving effectiveness of our management system to maximize customer satisfaction. We sincerely hope to make progress with our customers and create a win-win future together. Welcome to join us for business!
By Rita from Ethiopia - 2018.06.12 16:22
Problems can be quickly and effectively resolved, it is worth to be trust and working together.
By Heloise from Stuttgart - 2017.09.29 11:19
Products categories
-
China OEM Semiconductor X Ray Detectors - Dolp...
-
PriceList for Flat Panel Detector Radiology - ...
-
Top Quality Dental Radiography Sensor - Dolphi...
-
Factory Outlets X Ray Flat Panel Detectors For ...
-
PriceList for Vet X Rays - Custom plate detect...
-
Professional Design Diagnostic And Intervention...
