PriceList for Flat Panel Detector Radiology - Whale1613FDI-UM Fixed Type Industrial X-ray Detector – haobo

Whale1613FDI-UM production is a fixed type and low noise x-ray flat panel detector based on amorphous silicon technology. Whale1613FDI-UM production takes a high image quality and a large dynamic range, also Whale1613FDI-UM possesses multi-gain stage, this function makes it possible that the detector can both be suitable for high sensitivity and large dynamic range requirements. Based on above characteristics, Whale1613FDI-UM detector can be widely used in industrial SMT, electronics, lithium battery chip wire bonding inspection.The Whale1613FDI-UM also has a higher power range, which is better suited to the high-end requirements of industrial testing.

High dynamic range

Long life time

Technology
Sensor	A-Si
Scintillator	GOS / CSI
Active Area	128 x 160 mm
Pixel Matrix	1024 x 1248
Pixel Pitch	125 μm
AD Conversion	16 bits
Interface
Communication Interface	Gigabit Ethernet
Exposure Control	Pulse Sync In (Edge or Level) / Pulse Sync Out (Edge or Level)
Mode	Software Mode / HVG Sync Mode / FPD Sync Mode
Frame Speed	30fps(1×1)
Operating System	Windows7 / Windows10 OS 32 bits or 64 bits
Technical Performance
Resolution	4.0 lp/mm
Energy Range	40-350 KV
Lag	＜1% 1st frame
Dynamic Range	≥ 86dB
Sensitivity	460 lsb/uGy
SNR	49 dB @(20000lsb)
MTF	75% @(1 lp/mm)
	41% @(2 lp/mm)
	25% @(3 lp/mm)
DQE	62% @(0 lp/mm)
	45% @(1 lp/mm)
	28% @(2 lp/mm)
Mechanical
Dimension(HxWxD)	222 x 190 x 49 mm
Weight	4.1 Kg
Sensor Protection Material	Carbon Fiber
Housing Material	Aluminum Alloy
Environmental
Temperature Range	10~35℃(operating); -10~50℃(storage)
Humidity	30~70% RH(non-condensing)
Vibration	IEC/EN 60721-3 class 2M3(10~150 Hz, 0.5 g)
Shock	IEC/EN 60721-3 class 2M3(11 ms, 2 g)
Dust and Water Resistant	IPX0
Power
Supply	100~240 VAC
Frequency	50/60 Hz
Consumption	8W
Application
Industry	SMT, Electronics, Lithium Battery Chip and Wire Bonding Inspection
Mechanical Dimension