Personlized Products Pet Medical Testing – Dolphin0606FDI CMOS Industrial X-ray detector – haobo Detail:
Dolphin0606FDI production is a fixed type and low noise x-ray flat panel detector based on CMOS. CMOS sensors use a single crystal silicon process for chip fabrication. Direct integral amplification within pixel cells leads to lower electronic noise, higher signal-to-noise ratio, and higher quantum detection efficiency (DQE) than amorphous silicon, so CMOS sensors are particularly suitable for low-dose imaging scenarios. Based on above characteristics, Dolphin0606FDI detector can be widely used in industrial SMT, electronics, lithium battery and chip wire bonding inspection.
Electronic noise is lower
Higher signal-to-noise ratio
|
Technology |
|
|
Sensor |
CMOS |
|
Scintillator |
CSI |
|
Active Area |
60 x 53.5 mm |
|
Pixel Matrix |
1200 x 1056 |
|
Pixel Pitch |
50 μm |
|
AD Conversion |
14 bits |
|
Interface |
|
|
Communication Interface |
Optical Fiber |
|
Exposure Control |
Pulse Sync In (Edge or Level) / Pulse Sync Out (Edge or Level) |
|
Work Mode |
Software Mode / HVG Sync Mode / FPD Sync Mode |
|
Frame Speed |
51fps (1×1) |
|
Operating System |
Windows7 / Windows10 OS 32 bits or 64 bits |
|
Technical Performance |
|
|
Resolution |
10.0 lp/mm |
|
Energy Range |
40~160 KV |
|
Lag |
0.01% @1st frame |
|
Dynamic Range |
≥ 73dB |
|
Sensitivity |
100 lsb/uGy |
|
SNR |
48 dB @(20000lsb) |
|
MTF |
90% @(1 lp/mm) |
|
82% @(2 lp/mm) |
|
|
74% @(3 lp/mm) |
|
|
DQE (2uGy) |
65% @(0 lp/mm) |
|
48% @(1 lp/mm) |
|
|
37% @(2 lp/mm) |
|
|
Mechanical |
|
|
Dimension(H x W x D) |
171 x 171 x 37 mm |
|
Weight |
2.8 Kg |
|
Sensor Protection Material |
Carbon Fiber |
|
Housing Material |
Aluminum Alloy |
|
Environmental |
|
|
Temperature Range |
10~35°℃ (operating); -10~50℃(storage) |
|
Humidity |
30~70% RH(non-condensing) |
|
Vibration |
IEC/EN 60721-3 class 2M3(10~150 Hz,0.5 g) |
|
Shock |
IEC/EN 60721-3 class 2M3(11 ms,2 g) |
|
Dust and Water Resistant |
IPX0 |
|
Power |
|
|
Supply |
100~240 VAC |
|
Frequency |
50/60 Hz |
|
Consumption |
6 W |
|
Application |
|
|
Industrial |
SMT, Electronics, Lithium Battery Chip Wire Bonding Inspection |
|
Mechanical Dimension |
|
Product detail pictures:
Related Product Guide:
Our organization sticks to your principle of "Quality may be the life of your organization, and reputation will be the soul of it" for Personlized Products Pet Medical Testing – Dolphin0606FDI CMOS Industrial X-ray detector – haobo , The product will supply to all over the world, such as: Oslo, Pakistan, Maldives, We care about every steps of our services, from factory selection, product development & design, price negotiation, inspection, shipping to aftermarket. Now we have implemented a strict and complete quality control system, which ensures that each product can meet quality requirements of customers. Besides, all of our solutions have been strictly inspected before shipment. Your Success, Our Glory: Our aim is to help customers realize their goals. We're making great efforts to achieve this win-win situation and sincerely welcome you to join us.
By Delia Pesina from Amsterdam - 2018.12.14 15:26
The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
By Maggie from Egypt - 2018.05.13 17:00
