Online Exporter Medical Routine Dr Panel Detector - Dolphin0606FDI CMOS Industrial X-ray detector – haobo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate inside our success for X Ray Detector Working Principle, Dental Digital Radiography Systems, X Ray Metal Detectors, If you are fascinated in any of our products, you should come to feel no cost to call us for more aspects. We hope to cooperate with a lot more close friends from all over the world.
Online Exporter Medical Routine Dr Panel Detector - Dolphin0606FDI CMOS Industrial X-ray detector – haobo Detail:

Dolphin0606FDI production is a fixed type and low noise x-ray flat panel detector based on CMOS. CMOS sensors use a single crystal silicon process for chip fabrication. Direct integral amplification within pixel cells leads to lower electronic noise, higher signal-to-noise ratio, and higher quantum detection efficiency (DQE) than amorphous silicon, so CMOS sensors are particularly suitable for low-dose imaging scenarios. Based on above characteristics, Dolphin0606FDI detector can be widely used in industrial SMT, electronics, lithium battery and chip wire bonding inspection.

Electronic noise is lower

Higher signal-to-noise ratio

Technology

Sensor

CMOS

Scintillator

CSI

Active Area

60 x 53.5 mm

Pixel Matrix

1200 x 1056

Pixel Pitch

50 μm

AD Conversion

14 bits

Interface

Communication Interface

Optical Fiber

Exposure Control 

Pulse Sync In (Edge or Level) / Pulse Sync Out (Edge or Level)

Work Mode

Software Mode / HVG Sync Mode / FPD Sync Mode

Frame Speed

51fps (1×1)

Operating System 

Windows7 / Windows10 OS 32 bits or 64 bits

Technical Performance

Resolution

10.0 lp/mm

Energy Range

40~160 KV

Lag 

0.01% @1st frame

Dynamic Range 

≥ 73dB

Sensitivity 

100 lsb/uGy

SNR 

48 dB @(20000lsb)

MTF 

90% @(1 lp/mm)

82% @(2 lp/mm)

74% @(3 lp/mm)

DQE (2uGy) 

65% @(0 lp/mm)

48% @(1 lp/mm)

37% @(2 lp/mm)

Mechanical

Dimension(H x W x D) 

171 x 171 x 37 mm

Weight 

2.8 Kg

Sensor Protection Material

Carbon Fiber

Housing Material 

Aluminum Alloy

Environmental

Temperature Range 

10~35°℃ (operating); -10~50℃(storage)

Humidity

30~70% RH(non-condensing)

Vibration

IEC/EN 60721-3 class 2M3(10~150 Hz,0.5 g)

Shock 

IEC/EN 60721-3 class 2M3(11 ms,2 g)

Dust and Water Resistant

IPX0

Power

Supply 

100~240 VAC

Frequency 

50/60 Hz

Consumption

6 W

Application

Industrial

SMT, Electronics, Lithium Battery

Chip Wire Bonding Inspection

Mechanical Dimension


Product detail pictures:

Online Exporter Medical Routine Dr Panel Detector - Dolphin0606FDI CMOS Industrial X-ray detector – haobo detail pictures

Online Exporter Medical Routine Dr Panel Detector - Dolphin0606FDI CMOS Industrial X-ray detector – haobo detail pictures

Online Exporter Medical Routine Dr Panel Detector - Dolphin0606FDI CMOS Industrial X-ray detector – haobo detail pictures


Related Product Guide:

Fast and superior quotations, informed advisers to help you choose the correct merchandise that suits all your requirements, a short generation time, responsible quality control and different services for paying and shipping affairs for Online Exporter Medical Routine Dr Panel Detector - Dolphin0606FDI CMOS Industrial X-ray detector – haobo , The product will supply to all over the world, such as: Accra, Costa Rica, Lisbon, Due to the stability of our items, timely supply and our sincere service, we are able to sell our merchandise not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.
  • The product manager is a very hot and professional person, we have a pleasant conversation, and finally we reached a consensus agreement.
    5 Stars By Emma from Lisbon - 2018.06.18 17:25
    Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
    5 Stars By Roland Jacka from New Orleans - 2017.04.08 14:55
    Write your message here and send it to us