OEM China Introduction To Biomedical Imaging Systems - Dolphin0606FDI CMOS Industrial X-ray detector – haobo

Short Description:

Send email to us

Product Detail

Product Tags

Feedback (2)

While using the "Client-Oriented" organization philosophy, a rigorous top quality command process, highly developed production devices and a potent R&D workforce, we normally provide high quality products, outstanding solutions and aggressive charges for Vascular And Interventional Radiology, Photodiode Xray, Cmos X Ray, We always welcome new and old customers presents us with valuable advice and proposals for cooperation, let us grow and develop together, and to contribute to our community and staff!

OEM China Introduction To Biomedical Imaging Systems - Dolphin0606FDI CMOS Industrial X-ray detector – haobo Detail:

Dolphin0606FDI production is a fixed type and low noise x-ray flat panel detector based on CMOS. CMOS sensors use a single crystal silicon process for chip fabrication. Direct integral amplification within pixel cells leads to lower electronic noise, higher signal-to-noise ratio, and higher quantum detection efficiency (DQE) than amorphous silicon, so CMOS sensors are particularly suitable for low-dose imaging scenarios. Based on above characteristics, Dolphin0606FDI detector can be widely used in industrial SMT, electronics, lithium battery and chip wire bonding inspection.

Electronic noise is lower

Higher signal-to-noise ratio

Technology
Sensor	CMOS
Scintillator	CSI
Active Area	60 x 53.5 mm
Pixel Matrix	1200 x 1056
Pixel Pitch	50 μm
AD Conversion	14 bits
Interface
Communication Interface	Optical Fiber
Exposure Control	Pulse Sync In (Edge or Level) / Pulse Sync Out (Edge or Level)
Work Mode	Software Mode / HVG Sync Mode / FPD Sync Mode
Frame Speed	51fps (1×1)
Operating System	Windows7 / Windows10 OS 32 bits or 64 bits
Technical Performance
Resolution	10.0 lp/mm
Energy Range	40~160 KV
Lag	0.01% @1st frame
Dynamic Range	≥ 73dB
Sensitivity	100 lsb/uGy
SNR	48 dB @(20000lsb)
MTF	90% @(1 lp/mm)
	82% @(2 lp/mm)
	74% @(3 lp/mm)
DQE (2uGy)	65% @(0 lp/mm)
	48% @(1 lp/mm)
	37% @(2 lp/mm)
Mechanical
Dimension(H x W x D)	171 x 171 x 37 mm
Weight	2.8 Kg
Sensor Protection Material	Carbon Fiber
Housing Material	Aluminum Alloy
Environmental
Temperature Range	10~35°℃ (operating); -10~50℃(storage)
Humidity	30~70% RH(non-condensing)
Vibration	IEC/EN 60721-3 class 2M3(10~150 Hz,0.5 g)
Shock	IEC/EN 60721-3 class 2M3(11 ms,2 g)
Dust and Water Resistant	IPX0
Power
Supply	100~240 VAC
Frequency	50/60 Hz
Consumption	6 W
Application
Industrial	SMT, Electronics, Lithium Battery Chip Wire Bonding Inspection
Mechanical Dimension

Product detail pictures:

Related Product Guide:

With our leading technology also as our spirit of innovation,mutual cooperation, benefits and development, we are going to build a prosperous future jointly with your esteemed company for OEM China Introduction To Biomedical Imaging Systems - Dolphin0606FDI CMOS Industrial X-ray detector – haobo , The product will supply to all over the world, such as: New Orleans, Rome, Algeria, Our products are widely sold to Europe, USA, Russia, UK, France, Australia, Middle East, South America, Africa, and Southeast Asia, etc. Our solutions are highly recognized by our customers from all around the world. And our company is committed to continually improving effectiveness of our management system to maximize customer satisfaction. We sincerely hope to make progress with our customers and create a win-win future together. Welcome to join us for business!

3d Beam Cone Scan