Manufacturer for Cr In Radiography - Dolphin0606FDI CMOS Industrial X-ray detector – haobo Detail:
Dolphin0606FDI production is a fixed type and low noise x-ray flat panel detector based on CMOS. CMOS sensors use a single crystal silicon process for chip fabrication. Direct integral amplification within pixel cells leads to lower electronic noise, higher signal-to-noise ratio, and higher quantum detection efficiency (DQE) than amorphous silicon, so CMOS sensors are particularly suitable for low-dose imaging scenarios. Based on above characteristics, Dolphin0606FDI detector can be widely used in industrial SMT, electronics, lithium battery and chip wire bonding inspection.
Electronic noise is lower
Higher signal-to-noise ratio
|
Technology |
|
|
Sensor |
CMOS |
|
Scintillator |
CSI |
|
Active Area |
60 x 53.5 mm |
|
Pixel Matrix |
1200 x 1056 |
|
Pixel Pitch |
50 μm |
|
AD Conversion |
14 bits |
|
Interface |
|
|
Communication Interface |
Optical Fiber |
|
Exposure Control |
Pulse Sync In (Edge or Level) / Pulse Sync Out (Edge or Level) |
|
Work Mode |
Software Mode / HVG Sync Mode / FPD Sync Mode |
|
Frame Speed |
51fps (1×1) |
|
Operating System |
Windows7 / Windows10 OS 32 bits or 64 bits |
|
Technical Performance |
|
|
Resolution |
10.0 lp/mm |
|
Energy Range |
40~160 KV |
|
Lag |
0.01% @1st frame |
|
Dynamic Range |
≥ 73dB |
|
Sensitivity |
100 lsb/uGy |
|
SNR |
48 dB @(20000lsb) |
|
MTF |
90% @(1 lp/mm) |
|
82% @(2 lp/mm) |
|
|
74% @(3 lp/mm) |
|
|
DQE (2uGy) |
65% @(0 lp/mm) |
|
48% @(1 lp/mm) |
|
|
37% @(2 lp/mm) |
|
|
Mechanical |
|
|
Dimension(H x W x D) |
171 x 171 x 37 mm |
|
Weight |
2.8 Kg |
|
Sensor Protection Material |
Carbon Fiber |
|
Housing Material |
Aluminum Alloy |
|
Environmental |
|
|
Temperature Range |
10~35°℃ (operating); -10~50℃(storage) |
|
Humidity |
30~70% RH(non-condensing) |
|
Vibration |
IEC/EN 60721-3 class 2M3(10~150 Hz,0.5 g) |
|
Shock |
IEC/EN 60721-3 class 2M3(11 ms,2 g) |
|
Dust and Water Resistant |
IPX0 |
|
Power |
|
|
Supply |
100~240 VAC |
|
Frequency |
50/60 Hz |
|
Consumption |
6 W |
|
Application |
|
|
Industrial |
SMT, Electronics, Lithium Battery Chip Wire Bonding Inspection |
|
Mechanical Dimension |
|
Product detail pictures:
Related Product Guide:
We support our buyers with ideal high quality products and high level service. Becoming the specialist manufacturer in this sector, we have gained rich practical experience in producing and managing for Manufacturer for Cr In Radiography - Dolphin0606FDI CMOS Industrial X-ray detector – haobo , The product will supply to all over the world, such as: Mombasa, Angola, Thailand, With the support of our highly experienced professionals, we manufacture and supply best quality products. These are quality tested at various occasions to ensure only flawless range is delivered to customers, we also customize the array as per the need of customers to meet the requirement of customers.
By Lillian from Manchester - 2018.09.23 17:37
The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.
By Bruno Cabrera from Belgium - 2017.12.31 14:53
