Whale3025FQI-M productio est fixum genus et vox humilis x-ray tabula plana detector secundum technologiam amorphosam silicon.A-Si technicae detector fundatae multae utilitates possidet quae perpendat cum aliis technicis technicis,Whale3025FQI-M productio altam imaginem accipit qualitatem et amplitudinem dynamicam, etiam Whale3025FQI-M multi-lucri scaenam possidet, hoc munus efficit ut detector possit tum aptae ad altae sensus et magnae dynamicae progressionis requisita.Ex supra notis, Whale3025FQI-M X-radius tabulae planae detectoris late in SMT adhibita est, electronicis, altilium lithium et applicationes filum filum glutinolum.
• High dynamic range
• Longa vita resistentia radialis
Technology | |
Sensor | A-Si |
Scintillator | CSI / GOS |
Active Area | 250 x 286 mm |
Pixel Matrix | 1792 x 2048 |
Pixel Pix | 140 μm |
AD Conversionem | 16 bits |
Interface | |
Communication Interface | Gigabit Ethernet |
Patefacio Imperium | Sync in pulsum (vel Edge Level) / de pulsus sync (vel Edge Level) |
Modus | Software Mode/HVG Sync Mode/FPD Sync Mode |
Frame velocitate | <=10fps |
Sistema operatum | " |
Technica euismod | |
Resolution | 3.5 lp/mm |
Energy dolor | 40-350 KV |
Lag | ≤1% @ 1st frame |
Dynamic Range | ≥86dB |
Sensibilitas | 540 lsb/uGy |
SNR | 48 dB @(2000lsb) |
MTF | 70% @(1 lp/mm) |
38% @(2 lp/mm) | |
21% @(3 lp/mm) | |
DQE | 58% @(0 lp/mm) |
41% @(1 lp/mm) | |
25% @(2 lp/mm) | |
Mechanica | |
Dimensio (H x W x D) | 322 x 285x 50.6 mm |
Pondus | 6.2 Kg |
Sensor Praesidium Material | Carbon Fiber |
habitationi Material | Aluminium Alloy |
Environmental | |
Temperature Range | 10~35℃(operando); -10~50℃(repono) |
Umor | XXX ~ LXX% RH (non-condensatione) |
Vibratio | IEC/EN 60721-3 classis 2M3(10~150 Hz,0.5 g) |
Offensus | IEC/EN 60721-3 classis 2M3 (11 ms,2 g) |
Pulvis et aqua obsistens | IPX0 |
Potestas | |
Supply | 100~240 VAC |
Frequentia | 50/60 Hz |
Consummatio | 10W |
Regulatory | |
CFDA (China) | |
FDA (USA) | |
CE (Europe) | |
Applicationem | |
Industry | SMT, Electronics, Lithium Pugna et Chip Wire Bonding Inspection |
Mechanica Dimensio |