Mmepụta Shark2323FPM bụ ụdị edozi na obere mkpọtụ x ray flat panel detector dabere na teknụzụ Indium Gallium Zinc Oxide.Ihe nchọpụta teknụzụ IGZO nwere ọtụtụ uru ndị na-adịghị na teknụzụ ndị ọzọ, mmepụta Shark2323FPM na-ewe ogo onyonyo dị elu, ọsọ etiti, yana oke ike, Shark2323FPM nwekwara ọkwa uru dị iche iche, ọrụ a na-eme ka o kwe omume na onye nyocha ahụ nwere ike ịbụ abụọ. adabara elu uche na nnukwu ike nso chọrọ.Dabere na njirimara ndị dị n'elu, enwere ike iji ihe nchọpụta Shark2323FPM mee ihe na ahụike, ụlọ ọrụ mmepụta ihe, ọgwụgwọ anụmanụ, na mpaghara nyocha.
Ọsọ etiti dị elu
Ogo onyonyo dị elu
| Nkà na ụzụ | |
| Ihe mmetụta | IGZO |
| Scintillator | CSI/GOS |
| Mpaghara nọ n'ọrụ | 227 x 227 mm |
| Pixel Matrix | 1536 x 1536 |
| Pixel Pitch | 148 mm |
| Ngbanwe AD | 16 ibeji |
| Interface | |
| Interface nkwurịta okwu | Gigabit Ethernet |
| Njikwa ngosi | Mmekọrịta Pulse Na (Edge ma ọ bụ ọkwa) / Pulse Sync Out (Edge or Level) |
| Ụdị ọrụ | Ụdị ngwanrọ / HVG mmekọrịta / FPD mode mmekọrịta |
| Ọsọ etiti | 12fps (1x1) / 50fps (2x2) |
| Sistemụ nrụọrụ | Windows 7 / Windows 10 OS 32-bit ma ọ bụ 64-bit |
| Nrụ ọrụ nka | |
| Mkpebi | 3.37 lp / mm |
| Oke ike | 40-160 KV |
| Lag | ≤0.8% 1st etiti |
| Oke dị ike | ≥88dB |
| Mmetụta | 740 lb/uGy |
| SNR | 50dB @(20000lsb) |
| MTF | 60% @(1 lp/mm) |
| 25% @(2 lp/mm) | |
| 10% @(3 lp/mm) | |
| DQE (2uGy) | 65% @(0 lp/mm) |
| 45% @(1 lp/mm) | |
| 30% @(2 lp/mm) | |
| Mechanical | |
| Akụkụ (H x W x D) | 268 x 265 x 28 mm |
| Ibu | 2.8 n'arọ |
| Ihe nchekwa ihe mmetụta | Carbon Fiber |
| Ihe eji eme ụlọ | Aluminom Alloy |
| gburugburu ebe obibi | |
| Oke okpomọkụ | 10 ~ 35 ° ℃ (na-arụ ọrụ);-10 ~ 50 ℃ (nchekwa) |
| iru mmiri | 30 ~ 70% RH (na-abụghị condensing) |
| Mmaji | IEC/EN 60721-3 klaasị 2M3 (10 ~ 150 Hz, 0.5 g) |
| Ujo | IEC / EN 60721-3 klaasị 2M3 (11 ms, 2 g) |
| Uzuzu na mmiri na-eguzogide | IPX0 |
| Ike | |
| Nkwanye | 100-240 VAC |
| Ugboro ugboro | 50/60 Hz |
| Oriri | 10W |
| Nhazi | |
| CFDA (China) | |
| FDA (USA) | |
| CE (Europe) | |
| Ngwa | |
| Ọgwụ | Onyonyo dijitalụ nke C-arm ahụike Mgbanwe ihe onyonyo na nkwalite Tomography nke cone-beam (CBCT) |
| Akụkụ Mechanical | |
 | |
N'ịbụ ndị kasị elu ngwọta nke anyị factory, anyị ngwọta usoro a nwalere na merie anyị ahụmahụ ikike asambodo.Maka nkọwa ndị ọzọ na ndepụta ihe, biko pịa bọtịnụ iji nweta ozi agbakwunyere.
Biko nweere onwe gị enweghị ego iji zitere anyị nkọwapụta gị ma anyị ga-aza gị ngwa ngwa.Anyị nwere otu ọkachamara injinia ga-eje ozi maka mkpa ọ bụla zuru ezu.Enwere ike izipu ihe nlele efu maka gị onwe gị ka ị mara eziokwu ndị ọzọ.Ka ị nwee ike mezuo ọchịchọ gị, biko nwee mmetụta na-efu efu iji kpọtụrụ anyị.Ị nwere ike izipu anyị email wee kpọọ anyị ozugbo.Ọzọkwa, anyị na-anabata nleta na ụlọ ọrụ anyị si n'akụkụ ụwa niile maka ịmatakwu ụlọ ọrụ anyị.N'ahịa anyị na ndị ahịa nke mba dị iche iche, anyị na-agbasokarị ụkpụrụ nke nha anya na uru otu.Ọ bụ olileanya anyị ịzụ ahịa, site na nkwonkwo mbọ, ma ahia na ọbụbụenyi ka anyị na-erite uru.Anyị na-atụ anya inweta ajụjụ gị.
A na-emepụta ngwaahịa anyị na akụrụngwa kachasị mma.Oge ọ bụla, anyị na-emeziwanye mmemme mmepụta mgbe niile.Iji hụ na mma na ọrụ dị mma, anyị na-elekwasị anya na usoro mmepụta.Anyị enwetala otuto dị elu site na onye mmekọ.Anyị na-atụ anya ịmalite mmekọrịta azụmahịa na gị.
