Mmepụta Dolphin1412FDM bụ ụdị edozi na obere mkpọtụ x-ray flat panel detector dabere naCMOS.Ihe mmetụta CMOS na-eji otu usoro silicon kristal maka imepụta mgbawa.Mgbakwunye ngwa ngwa n'ime sel pikselụ na-eduga na mkpọtụ eletrọnịkị dị ala, ogo mgbama na mkpọtụ dị elu, yana nrụpụta ọnụọgụ dị elu (DQE) karịa silicon amorphous, yabụ sensọ CMOS dabara adaba maka ọnọdụ onyonyo dị ala.
• mkpọtụ eletrọnịkị dị ala
• Oke mgbama na mkpọtụ dị elu
| Nkà na ụzụ | |
| Ihe mmetụta | CMOS |
| Scintillator | CSI |
| Mpaghara nọ n'ọrụ | 120 x 140 mm |
| Pixel Matrix | 2400 x 2802 |
| Pixel Pitch | 50 μm |
| Ngbanwe AD | 14 ibeji |
| Interface | |
| Interface nkwurịta okwu | Fiber ngwa anya |
| Njikwa ngosi | Mmekọrịta Pulse Na (Edge ma ọ bụ ọkwa) / Pulse Sync Out (Edge or Level) |
| Ụdị ọrụ | Ụdị ngwanrọ / HVG mmekọrịta / FPD mode mmekọrịta |
| Ọsọ etiti | 29fps (1x1) |
| Sistemụ nrụọrụ | Windows 7 / Windows 10 OS 32-bit ma ọ bụ 64-bit |
| Nrụ ọrụ nka | |
| Mkpebi | 10.0 lp / mm |
| Oke ike | 40-160 KV |
| Lag | 0.01% 1st etiti |
| Oke dị ike | ≥ 73dB |
| Mmetụta | 100 lsb/uGy |
| SNR | 48dB @(20000lsb) |
| MTF | 90% @(1 lp/mm) |
| 82% @(2 lp/mm) | |
| 74% @(3 lp/mm) | |
| DQE (2uGy) | 65% @(0 lp/mm) |
| 48% @(1 lp/mm) | |
| 37% @(2 lp/mm) | |
| Mechanical | |
| Akụkụ (H x W x D) | 171 x 171 x 37 mm |
| Ibu | 3.2 n'arọ |
| Ihe nchekwa ihe mmetụta | Carbon Fiber |
| Ihe eji eme ụlọ | Aluminom Alloy |
| gburugburu ebe obibi | |
| Oke okpomọkụ | 10 ~ 35 ° ℃ (na-arụ ọrụ);-10 ~ 50 ℃ (nchekwa) |
| iru mmiri | 30 ~ 70% RH (na-abụghị condensing) |
| Mmaji | IEC / EN 60721-3 Klas 2M3 (10 ~ 150 Hz, 0.5 g) |
| Ujo | IEC/EN 60721-3 Klas 2M3(11ms,2 g) |
| Uzuzu na mmiri na-eguzogide | IPX0 |
| Ike | |
| Nkwanye | 100-240 VAC |
| Ugboro ugboro | 50/60 Hz |
| Oriri | 8 W |
| Nhazi | |
| CFDA (China) | |
| FDA (USA) | |
| CE (Europe) | |
| Ngwa | |
| Ọgwụ | CBCT eze |
| Akụkụ Mechanical | |
Dee ozi gị ebe a ziga anyị ya
