Free sample for Cone Beam 3d Scan - Dolphin0606FDI CMOS Industrial X-ray detector – haobo Detail:
Dolphin0606FDI production is a fixed type and low noise x-ray flat panel detector based on CMOS. CMOS sensors use a single crystal silicon process for chip fabrication. Direct integral amplification within pixel cells leads to lower electronic noise, higher signal-to-noise ratio, and higher quantum detection efficiency (DQE) than amorphous silicon, so CMOS sensors are particularly suitable for low-dose imaging scenarios. Based on above characteristics, Dolphin0606FDI detector can be widely used in industrial SMT, electronics, lithium battery and chip wire bonding inspection.
Electronic noise is lower
Higher signal-to-noise ratio
Technology |
|
Sensor |
CMOS |
Scintillator |
CSI |
Active Area |
60 x 53.5 mm |
Pixel Matrix |
1200 x 1056 |
Pixel Pitch |
50 μm |
AD Conversion |
14 bits |
Interface |
|
Communication Interface |
Optical Fiber |
Exposure Control |
Pulse Sync In (Edge or Level) / Pulse Sync Out (Edge or Level) |
Work Mode |
Software Mode / HVG Sync Mode / FPD Sync Mode |
Frame Speed |
51fps (1×1) |
Operating System |
Windows7 / Windows10 OS 32 bits or 64 bits |
Technical Performance |
|
Resolution |
10.0 lp/mm |
Energy Range |
40~160 KV |
Lag |
0.01% @1st frame |
Dynamic Range |
≥ 73dB |
Sensitivity |
100 lsb/uGy |
SNR |
48 dB @(20000lsb) |
MTF |
90% @(1 lp/mm) |
82% @(2 lp/mm) |
|
74% @(3 lp/mm) |
|
DQE (2uGy) |
65% @(0 lp/mm) |
48% @(1 lp/mm) |
|
37% @(2 lp/mm) |
|
Mechanical |
|
Dimension(H x W x D) |
171 x 171 x 37 mm |
Weight |
2.8 Kg |
Sensor Protection Material |
Carbon Fiber |
Housing Material |
Aluminum Alloy |
Environmental |
|
Temperature Range |
10~35°℃ (operating); -10~50℃(storage) |
Humidity |
30~70% RH(non-condensing) |
Vibration |
IEC/EN 60721-3 class 2M3(10~150 Hz,0.5 g) |
Shock |
IEC/EN 60721-3 class 2M3(11 ms,2 g) |
Dust and Water Resistant |
IPX0 |
Power |
|
Supply |
100~240 VAC |
Frequency |
50/60 Hz |
Consumption |
6 W |
Application |
|
Industrial |
SMT, Electronics, Lithium Battery Chip Wire Bonding Inspection |
Mechanical Dimension |
|
Product detail pictures:
Related Product Guide:
We are committed to providing easy,time-saving and money-saving one-stop purchasing service of consumer for Free sample for Cone Beam 3d Scan - Dolphin0606FDI CMOS Industrial X-ray detector – haobo , The product will supply to all over the world, such as: Philadelphia, Lebanon, Holland, We look forward to hearing from you, whether you are a returning customer or a new one. We hope you will find what you are looking for here, if not, please contact us immediately. We pride ourselves on top notch customer service and response. Thank you for your business and support!
By Jack from Bulgaria - 2018.06.28 19:27
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Michelle from Malaysia - 2017.10.13 10:47