Free sample for Cone Beam 3d Scan - Dolphin0606FDI CMOS Industrial X-ray detector – haobo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Being supported by an highly developed and specialist IT team, we could give technical support on pre-sales & after-sales service for Computed And Digital Radiography, Flat Pannel Detector, Portable Digital Radiography System, All the time, we have been paying attention on all details to insure each product satisfied by our customers.
Free sample for Cone Beam 3d Scan - Dolphin0606FDI CMOS Industrial X-ray detector – haobo Detail:

Dolphin0606FDI production is a fixed type and low noise x-ray flat panel detector based on CMOS. CMOS sensors use a single crystal silicon process for chip fabrication. Direct integral amplification within pixel cells leads to lower electronic noise, higher signal-to-noise ratio, and higher quantum detection efficiency (DQE) than amorphous silicon, so CMOS sensors are particularly suitable for low-dose imaging scenarios. Based on above characteristics, Dolphin0606FDI detector can be widely used in industrial SMT, electronics, lithium battery and chip wire bonding inspection.

Electronic noise is lower

Higher signal-to-noise ratio

Technology

Sensor

CMOS

Scintillator

CSI

Active Area

60 x 53.5 mm

Pixel Matrix

1200 x 1056

Pixel Pitch

50 μm

AD Conversion

14 bits

Interface

Communication Interface

Optical Fiber

Exposure Control 

Pulse Sync In (Edge or Level) / Pulse Sync Out (Edge or Level)

Work Mode

Software Mode / HVG Sync Mode / FPD Sync Mode

Frame Speed

51fps (1×1)

Operating System 

Windows7 / Windows10 OS 32 bits or 64 bits

Technical Performance

Resolution

10.0 lp/mm

Energy Range

40~160 KV

Lag 

0.01% @1st frame

Dynamic Range 

≥ 73dB

Sensitivity 

100 lsb/uGy

SNR 

48 dB @(20000lsb)

MTF 

90% @(1 lp/mm)

82% @(2 lp/mm)

74% @(3 lp/mm)

DQE (2uGy) 

65% @(0 lp/mm)

48% @(1 lp/mm)

37% @(2 lp/mm)

Mechanical

Dimension(H x W x D) 

171 x 171 x 37 mm

Weight 

2.8 Kg

Sensor Protection Material

Carbon Fiber

Housing Material 

Aluminum Alloy

Environmental

Temperature Range 

10~35°℃ (operating); -10~50℃(storage)

Humidity

30~70% RH(non-condensing)

Vibration

IEC/EN 60721-3 class 2M3(10~150 Hz,0.5 g)

Shock 

IEC/EN 60721-3 class 2M3(11 ms,2 g)

Dust and Water Resistant

IPX0

Power

Supply 

100~240 VAC

Frequency 

50/60 Hz

Consumption

6 W

Application

Industrial

SMT, Electronics, Lithium Battery

Chip Wire Bonding Inspection

Mechanical Dimension


Product detail pictures:

Free sample for Cone Beam 3d Scan - Dolphin0606FDI CMOS Industrial X-ray detector – haobo detail pictures

Free sample for Cone Beam 3d Scan - Dolphin0606FDI CMOS Industrial X-ray detector – haobo detail pictures

Free sample for Cone Beam 3d Scan - Dolphin0606FDI CMOS Industrial X-ray detector – haobo detail pictures


Related Product Guide:

We not only will try our greatest to offer you excellent services to each individual client, but also are ready to receive any suggestion offered by our buyers for Free sample for Cone Beam 3d Scan - Dolphin0606FDI CMOS Industrial X-ray detector – haobo , The product will supply to all over the world, such as: Azerbaijan, India, New Zealand, Our factory is equipped with complete facility in 10000 square meters, which makes us be able to satisfy the producing and sales for most auto part products. Our advantage is full category, high quality and competitive price! Based on that, our products win a high admiration both at home and abroad.
  • Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
    5 Stars By ROGER Rivkin from Vietnam - 2018.09.29 13:24
    We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
    5 Stars By Rose from Bolivia - 2018.12.14 15:26
    Write your message here and send it to us