factory low price 3d Dental Scan - Dolphin0606FDI CMOS Industrial X-ray detector – haobo Detail:
Dolphin0606FDI production is a fixed type and low noise x-ray flat panel detector based on CMOS. CMOS sensors use a single crystal silicon process for chip fabrication. Direct integral amplification within pixel cells leads to lower electronic noise, higher signal-to-noise ratio, and higher quantum detection efficiency (DQE) than amorphous silicon, so CMOS sensors are particularly suitable for low-dose imaging scenarios. Based on above characteristics, Dolphin0606FDI detector can be widely used in industrial SMT, electronics, lithium battery and chip wire bonding inspection.
Electronic noise is lower
Higher signal-to-noise ratio
Technology |
|
Sensor |
CMOS |
Scintillator |
CSI |
Active Area |
60 x 53.5 mm |
Pixel Matrix |
1200 x 1056 |
Pixel Pitch |
50 μm |
AD Conversion |
14 bits |
Interface |
|
Communication Interface |
Optical Fiber |
Exposure Control |
Pulse Sync In (Edge or Level) / Pulse Sync Out (Edge or Level) |
Work Mode |
Software Mode / HVG Sync Mode / FPD Sync Mode |
Frame Speed |
51fps (1×1) |
Operating System |
Windows7 / Windows10 OS 32 bits or 64 bits |
Technical Performance |
|
Resolution |
10.0 lp/mm |
Energy Range |
40~160 KV |
Lag |
0.01% @1st frame |
Dynamic Range |
≥ 73dB |
Sensitivity |
100 lsb/uGy |
SNR |
48 dB @(20000lsb) |
MTF |
90% @(1 lp/mm) |
82% @(2 lp/mm) |
|
74% @(3 lp/mm) |
|
DQE (2uGy) |
65% @(0 lp/mm) |
48% @(1 lp/mm) |
|
37% @(2 lp/mm) |
|
Mechanical |
|
Dimension(H x W x D) |
171 x 171 x 37 mm |
Weight |
2.8 Kg |
Sensor Protection Material |
Carbon Fiber |
Housing Material |
Aluminum Alloy |
Environmental |
|
Temperature Range |
10~35°℃ (operating); -10~50℃(storage) |
Humidity |
30~70% RH(non-condensing) |
Vibration |
IEC/EN 60721-3 class 2M3(10~150 Hz,0.5 g) |
Shock |
IEC/EN 60721-3 class 2M3(11 ms,2 g) |
Dust and Water Resistant |
IPX0 |
Power |
|
Supply |
100~240 VAC |
Frequency |
50/60 Hz |
Consumption |
6 W |
Application |
|
Industrial |
SMT, Electronics, Lithium Battery Chip Wire Bonding Inspection |
Mechanical Dimension |
|
Product detail pictures:
Related Product Guide:
We purpose to understand high quality disfigurement with the output and supply the top service to domestic and overseas buyers wholeheartedly for factory low price 3d Dental Scan - Dolphin0606FDI CMOS Industrial X-ray detector – haobo , The product will supply to all over the world, such as: Plymouth, Anguilla, Greece, We welcome you to visit our company, factory and our showroom displayed various products that will meet your expectation, meanwhile, it is convenient to visit our website, our sales staff will try their efforts to provide you the best service. If you need more information, please do not hesitate to contact us by E-mail or telephone.
By Natividad from Turin - 2018.12.25 12:43
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By May from Belize - 2018.05.15 10:52